Knowledge Painter

Turn one product image into a setup walkthrough

An exploded product image can identify assemblies, but an installer also needs to understand order, alignment, and the visible checks before handoff. This example builds a visual walkthrough around those decisions.

Image-to-video example

Turn one product image into a setup walkthrough

Example source

Sensor-module installation reference image

The uploaded exploded-view image anchors the visible parts and their relationships. It is an illustrative setup sample; use the current manufacturer instructions for approved torque, compatibility, safety, and service requirements.

Remix

The communication problem

The source image contains several assemblies at once. The video first gives each assembly a role, then follows the setup sequence so the viewer can separate identification, placement, status checking, and enclosure.

Source-to-scene map

Turn the source decisions into a visual path

  1. 01

    Identify the assemblies

    The image is unpacked into the power carrier, sensor board, and controller base before assembly starts.

  2. 02

    Align the signal path

    The walkthrough connects vertical placement with the visible bus and trace relationships.

  3. 03

    Check visible status

    Status indicators become a concrete verification step rather than a label in a static image.

  4. 04

    Close the enclosure and hand off

    The final sequence returns to the complete assembly and makes the next review point clear.

Visual treatment

Why this visual treatment fits

A source-led assembly sequence keeps the viewer oriented in the same product image while each step adds one observable relationship or check.

Reuse the pattern

Start from your own document

  • Use one current product image that clearly shows the assemblies to be discussed.
  • Separate part identification from the action and check that follow it.
  • Keep approved installation, safety, and service requirements in the current manufacturer documentation.
Use this structure

English narration

Video transcript

  1. 01See the modular sensor system before we examine its setup.
  2. 02First, identify the three functional assemblies.
  3. 03The uppermost bracket carries dual disc power cells linked by a central circuit bridge.
  4. 04Directly beneath sits the sensor board, featuring a central optical element flanked by green and amber status indicators.
  5. 05At the base, the main microcontroller carrier anchors the assembly inside a perimeter-bolted chassis.
  6. 06During assembly, vertical alignment dictates reliable signal integrity.
  7. 07The central bus routes four primary signal lines from the processor directly into the core sensor module, while flanking trace channels connect power and status lines to the dual indicator nodes.
  8. 08Lower the sensor board evenly onto the standoff pins to avoid trace shearing.
  9. 09Before seating the top power carrier, verify visual status.
  10. 10When contact is established, the green LED confirms baseline power distribution to the sensing element, while the amber LED validates channel readiness.
  11. 11Both active lights confirm that circuit pathways across all pins are fully functional.
  12. 12To complete the setup, compress the battery plate firmly into position and secure the housing through the four corner fastener mounts.
  13. 13Your modular sensor is now verified, sealed, and ready for deployment.

FAQ

Create your first explainer video